Laser 103" AJ Z200

Specifications :

Wing Span - 103"
Length - 100"
Height - 27"
Wing Area -
AUW \(dry\) - 26-27 lbs.
Gas Power - 100cc to 120cc
Radio - 9 channel with 7 high torque servos \(400 oz./in minimum\) & 1 throttle servo, 2 rudder servos is optional not required.
Recommended CG Range and Control Throws : The center of gravity \(CG\) range for the 103" Laser Z200 is located at the front of the wing tube +- 1"in
Aileron Control Throws : Low Rates - 15 deg. \(30% Exp\) / Mid Rates - 35 deg. \(40% Exp\) / High Rates - 45 deg. \(50% Exp\)
Elevator Control Throws : Low Rates - 15 deg. \(30% Exp\) / Mid Rates - 35 deg. \(40% Exp\) / High Rates - 45 deg. \(50% Exp\)
Rudder Control Throws : Low Rates - 15 deg. \(30% Exp\) / Mid Rates - 35 deg. \(40% Exp\) / High Rates - Max Throw \(50% Exp\)

Included :

NEW - Carbon-Kevlar plywood construction!
NEW - Carbon-Kevlar reinforced landing gear mount!
NEW - Carbon-Kevlar reinforced firewall!
NEW - Durable, lightweight one piece cowl design!
NEW - Canopy

with cockpit!
Pre-hinged, glued and sealed ailerons & elevators
Carbon fiber main landing gear
Carbon fiber main wing tube
Dual carbon fiber stab tubes
Removable horizontal stabs & rudder
G10 fiberglass control horns
Aluminum standoffs for gas engines
Full-length canister tunnel
Heavy duty foam wheels with aluminum hubs
Heavy duty steel axles
Heavy duty pre-drilled wheel pants
Pre-drilled & rubber lined landing gear cuffs
Firewall pre drilled
Pre-run rudder pull-pull wires
High quality ball links & turnbuckles for all connections
Extra hardware bag for spares
Velcro for fuel tank or battery restraint

Note 5" Carbon Spinner is not supplied.

NOTE: This product is shipped in 3 separate boxes.

Also needed to complete :

Servo Extensions
\(4\) x 6" extensions for receiver to ailerons
\(2\) x 6" extensions for inner aileron
\(2\) x 24" extensions for outer ailerons
\(1\) x 24" extension for throttle servo
\(1\) x 24" extension for ignition kill
\(2\) x 36" extensions for push-pull rudder \(only needed for push/pull setup\)
\(3\) x 60" extensions for elevators
Aluminum Servo Arms
\(4\) x 1.75" single arms for ailerons
\(2\) x 1.75" single arms for elevators
\(2\) x 1.75" single arms for rudder \(only needed for push/pull setup\)
\(1\) x 3.50" double arm for rudder
5" Carbon Spinner