The Bowers FlyBaby is a Homebuilt Sport Plane from the `60s.It has been built after a set of plans in many different variants by aviators around the world.
One of the latest builders of a FlyBaby is Jim Katz from the USA, who has created one of the nicest ones ever built.
This has triggered the idea to build a FlyBaby as a large scale model.

Most of such wooden airplanes are built up and covered with iron-on film.Either they are made in questionable quality in ARF factories or individually built from plans.However, not many modelrs are actually `building` anymore today.So the ARF factories are the only options.Wrinkles, bad glue joints, oil soaked wood frames and iron-on covering coming off over time - who doesn`t know these problems.

CARF-Models set out to change this completely.Would it be possible to build an all composite `wooden airframe` in the molds?
Imitated wings made from ribs and spars, covered with fabric, stitched on the ribs?Painted in the molds, with a hard, sturdy and clean surface, easy to maintainas new?

Well, it is. Here is the proof. The half

CARF-Models FlyBaby!

The CARF-Models FlyBaby has a wingspan of 4.2m \(165"\) and a weight of 24-28 kg, depending on the engine.
With a 150-180 cc 2 cylinder four stroke engine it can be built safely below 25 kg, and if this european weight limit isn`t a problem, there are endless possibilities how it can be scaled up and detailed out.

Every component, wings, fuselage, stab and fin are all composite sandwich parts.In the tail area they are ULTRA LIGHT, in the front strong to hold heavy and powerful engines.
All parts have scale fabric surface structure with visible stitching onto the ribs.Even the inside of the fuselage in the cockpit area imitates a wooden struture.

The wings and stabs are connected with self sufficient carbon tubes, needing no full load bearing flying wires.The flying wires are only flexible dummies for scale appearance.
Setting up and breaking down at the field is a matter of minutes.

The landing gear is a strong carbon gear with stainless steel axles.
Two variants of wheels \(foam and air tube\) are availalbe, as well as a fantastic, strong, scale tail gear with 60 mm wheel.

The plane is controlled with

high torque servos.Simple, straight forward, everything is prepared for easy installation.

For the various engines various motor domes are offered, which are mounted to the fuselage with 10 - 12 bolts.
All engine electronics as well as the throttle and choke servos find place inside this motor dome.
Fuel tank and fuel pumps as well.Very easy maintenance is guaranteed.

The two-part cowling is split like the original.It can be removed easily without taking off propeller or silencers.

The inside of the fuselage has an imitation wood structure like the original, a wooden pilot seat, an instrument panel and a stick!

Optionally a 1/2 scale full body pilot is available, which is produced in cooperation with the Best: Tailored Pilots from the UK.

Transportation is easy due to removable wings, stab, rudder, fin and even the firewall with engine and cowling is removed within minutes.

Specifications :
Wingspan :165" \(4200 mm\) - single half wing 77" \(1960 mm\)
Fuselage Length : 106.5" \(2700 mm\) - without rudder 96.5" \(2450 mm\)
Weight : 54-60 Lbs \(24 - 27 kg\)
Motor : 150-180 cc 2stroke boxer, 170-240 cc 4stroke boxer \(not included\)

Servos :Standard size, 5 high torque servos, 2 regular servos