MX2 is aerobatic model with box structure fuselage. The model is inspired by the real MX2 - carbon fiber, two seat tandem sport aircraft produced by MX Aircraft of North Carolina. The main parts of the model are made of expanded polypropylene \(EPP\), which provides excellent resistance for the flying plane and during small crashes. The model has a plastic engine cover, transparent canopy and carbon landing gear. The wing is removable and is fixed to the fuselage with two plastic screws. Two-piece langing gear is bolted to a plywood center wing structure. The model is fully color-printed. You can add stickers to the engine cowl and to the cockpit. Motor mount is designed for rear engine mounting. Kit contains also spinner.
Basic power set:
Motor: Master Force 3530CA-14
ESC: MC-22 or MC-45
Prop: APC 11/5,5" electro \(for 3S LiPo battery\), APC 10/5" electro \(for 4S LiPo battery\)
Battery: LiPo 3S or 4S 1600-2200mAh \(4S battery adds a lot of power and it is good combination with this motor and 10/5E prop\)
Flying weight: 960g \(with LiPo 3S 2200mAh battery\)
High power set \(3D\):
Motor: Master Force 3536CA-8
ESC: MC-45
Prop: APC 11/5,5" electro \(for 3S LiPo battery\)
Battery: LiPo 3S 1600-2200mAh
Flying weight: 1090g \(with LiPo 3S 2200mAh battery and two

in cockpit\), you can save aproximatelly 100g when you will not install the cockpit.

Items Needed To Complete: RC Set with at least 4 channels MASTER Giga Prop 6 No. HC 4101, 4 miniservos MG 9-15g No. HC4310, electric motor MForce 3530CA-14 No. HC3510 or MForce 3536CA-8 No. HC3512, controller MC-45A No. HC3375, Accu pack LiPo 3S 1500-2500mAh, propeller APC 11/5.5E No. HCLP11055E nebo APC 10/5E No. HCLP10050E \(depending on the motor and battery\), thin CA Glue with CA kicker, basic tools.