Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines.These parts are then gold anodized to provide a beautiful, long-lasting finish.The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses.The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C \(356 F\).
The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C \(392 F\), making a motor that is virtually impossible to burn up in normal use.

All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter.

This motor is specifically designed for the newer micro helicopters, such as the T250, that requires 2.5mm output shaft.

Bearings are a normal wear item, and as such, need to be maintained and changed periodically.For maximum

make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly..

Specifications :

Stator Diameter: 22.0 mm \(0.866 in\)
Stator Thickness: 6.0 mm \(0.24 in\)
No. of Stator Arms: 9
No. of Magnet Poles: 6
Motor Wind: 24 Turn Delta
Motor Wire: 7-Strand 0.19mm
Motor Kv: 3900 RPM / Volt
No-Load Current \(IOA/6V\): 0.83 Amps Motor Resistance \(Rm\): 0.064 Ohms
Max Continuous Current: 14 Amps
Max Continuous Power: 150 Watts
Weight: 31.6 Grams \(1.12oz\)
Outside Diameter: 27.9 mm \(1.097 in\)
Shaft Diameter: 2.5mm
Body Length: 22.6 mm
Overall Shaft Length: 32.6mm \(1.28 in\)
Max Lipo Cell: 3s