The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit`s high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world`s most durable smoke oil pump, as has been demonstrated in several long-term tests.
The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.
The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.
If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.
The PowerBox Smokepump is

in a Standard version and a Jet version, the later with higher throughput and twin outlets.
The maximum flow rate of the Smokepump \(Order No. 8010\) is around 750 ml./min., while the Smokepump Jet \(Order No. 8015\) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin \(boxer\) engine.

Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.5 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 750ml/min
Smoke medium Smokeoil „blue Max" or 3W Smokeoil
Dimensions 79 x 31 mm
Weight 125g
Temperature range -30°C to +75°C