Widely use for rc car, boat, planes, crawlers, truck, helicopter, and works with futaba servo.
Compatible with FS-i4 / FS-i6 / FS-i10 / FS-GT2E / FS-GT2G / FS-T4B / FS-GT6B / FS-T6 / FS-TH9X / TH9b / Turnigy 9x v2 / FS-GT2 / FS-GT3B / FS-GT3C / FS-CT6B.
Ultra-small size and ultra-light weight, effectively save space and reduce aircraft`s weight-bearing.
Note: If you use this receiver with FS-GT2E, please switch the transmitter`s system to AFHDS before matching.

Specification:
Item Name: FS-R6B receiver
Channels: 6 channels
Model Type: Fixed-Wing/glider/ helicopter
RF Range: 2.4055-2.475GHz
RF Channel: 140
RF Receiver Sensitivity: -105dBm
Bandwidth: 500KHz
2.4GHz System: AFHDS
Modulation Type: GFSK
Power: 4.0-6.5V DC
Antenna Length: 26mm
Weight: 13g
Size: 52*35*15mm
i-BUS Port: No
Data Acquisition Port: No
Color: Grey \(Transparent\)
Certificate: CE0678, FCC

The supplied transmitter and receiver are already bound at production time so you don't need to do it.
If you are using another transmitter or receiver, you have to first bind them before use as described below:
1. Install batteries in the transmitter and turn it off.
2. Connect the binding jumper to the battery port of the receiver.
3. Connect the battery of the receiver to any channel power supply.
The red LED with blink indicating that it is in binding mode.
4. Press and hold the bind key of the transmitter and turn it on.
5. The

LED of the received should stop to blink meaning a successful binding.
6. Disconnect the receiver battery.
7. Turn off then back on the transmitter.
8. Connect all the servos to the receiver and then connect its battery.
9. Check if all servos are working as expected.
10. If anything is wrong, restart this procedure from the beginning.