Receiver for 2.4 GHz Futaba FASST.

• 5 channel miniature 2.4 GHz receiver
• Compatible with Futaba 2.4 GHz transmitters
• full range

Cutting-edge technology you can rely on The 35 and 40/41 MHz receivers from Simprop electronic have been tried and tested thousands of times and have been used consistently over decades further developed and improved.

• compatible with most Futaba 2.4 GHz transmitters*
• Automatic detection of 3 \(Car\), 6-7 and 8-14 channel transmitters
• Highest transmission security thanks to 2.4 GHz frequency hopping
• Antenna diversity
• programmable and updateable via PC interface USB \(optionally available\)
=> Channel assignment, dual rate, cycle time, etc.
• Failsafe can be set for all channels
• Support for transmitter-side failsafe
• Large operating voltage range => e.g. direct operation on 2 Lipos \(7.4V\) possible
• 2 status LEDs for reception and battery display
• Safe operation even with analog servos thanks to 3.3V pulse voltage and adjustable cycle time

The GigaScan 5 and GigaScan 7 are programmable 2.4GHz frequency hopping receivers. The receivers are compatible with GigaScan JM912 transmitter module and most Futaba 2.4GHz transmitters*. It doesn`t matter whether it`s a 3, 6-7 or
8-14 channel Futaba 2.4GHz transmitter.
Thanks to the frequency hopping \(up to 140 frequency changes per second\), the high bandwidth and the integrated

diversity, a high level of transmission security is achieved.
A simple press of the binding button is enough to switch the GigaScan receiver to the corresponding one to set the transmitter and bind to it.
The ID number of the sender is saved so that the receiver only evaluate the data from this transmitter.
During the binding process, the current servo positions are saved as failsafe values.
In the event of a longer reception failure, the failsafe values ​​are loaded so that the servos move to the saved positions.

With the optionally available PC interface USB and the PC-GigaScan software, various functions such as cycle time, channel assignment, reverse, Path limitation or delay function can be programmed.
This results in particularly diverse and flexible application options.

* \) tested with Megatech 3-channel 2.4 / FF6, FF7 2.4 / T8FG, T12, T14 2.4 / FF10 2.4 / FX30, FX40 2.4.

Servo outputs 5
Operation/display 2 1x binding button, 2x status LEDs
Flash microcontroller with fast reset yes
Frequency range normal 2.405…2.477 MHz
Frequency range France 2.407…2.450 MHz
Frequency channels normal/France 36/22
Operating voltage range 3.5…10 V
Current consumption approx. 50 mA
Modulation FSK
Temperature range -15/+55°C
Channel spacing 2.048 MHz
2 antennas diversity yes
Antenna length 3 cm
Range >Ground - Ground: 2000 m with visual

and receiver at 1.5 m height Ground - Air: >3000 m with visual contact
Programmability yes
Failsafe on all outputs, yes
Dimensions \(L x W x H\) 49 x 18 x 7.5 mm
Weight \(without case\) 5.2 g \(4.2 g\)